PRODUCT_LINE: BCM
============================================

Patch Description: The purpose of this patch is to apply a new core image (wi05.13) to a BCM 3.5 system.

SR/CRs fixed (versus BCM 3.5 GA): 

MSC Core wi05.13 

o Q01189301 LAN CTE application unavailable (core reset)  


MSC Core wi02.14P to wi05.12

o Q01107778 - Fixing T7316e emulator issues. 
o Q01028145 - Unable to send digits from slave when master puts conference on  
o Q01103606 - BCM 400 3.5 Random  
o Q01106980 - BCM reboot  
o Q01035344 - Hidden Calls should not be allowed to be put on auto-hold.  
o Q00934039 - Cross talk issue in Navy hospital customer site  
o Q00908268/Q00881236 - BCM3.01/Hunt Group pick-up 0 calling/Phone Lockup  
o Q00900888 - One Way Speech Path on Tandem'd Call  
o Q00880679 - Name not displayed on originating BCM set when CFDA is involved 
o Q00823209 - Remove check for cause in tandem of PROGRESS message 
o Q00863025 - Incoming DPNSS Embark calls fails 
o Q00881415 - Fix the previous fallback update so that QOS fallback works
o Q00823778 - Workaround M1 responding MCDN msg w/ diff CRef len than originat 
o Q00806551 - SETUP message with 0 digits 
o Q00851660 - Reset due to Timer Q cottuption for call retention timer 
o Q00863487 - BCM3.5 Second service mode is failing 
o Q00858392 - Progress Ind Interwor 
o Q00823818 - Umbilical path not deallocated after conference 
o Q00813441-01 - Core Reset: Interaction between Transfer and TRO 
o Q00851667 - PRI channel unavailable on BCM 3.5 
o Q00813441-02 - Analog tandem call interacts with tat to give one way voice path 
o Q00778544 - Fix for speech-path cut-through delay and T1 EAM Line lockup 
o Q00807186 - Prevent partial saving of VoIP Fallback data 
o Q00827370 - Loss of Auto Handsfree When Selecting Line Keys (on-hook 
o Q00823083 - Fix tandem overflow from normal route to default route 
o Q00844756 - DECT call with 3.1khz gets rejected by remte PBX 
o Q00813441 - BCM centralized voice mail failing 
o Q00812385 - GATM: ROI does not operate properly in Australian profile 
o Q00801868 - Allow a SETUP message with Calling Number IE with no digits 
o Q00750217 - CALA DSP contains mu law tones instead of A law tone  
o Q00789981 - No Way Transmission on Incoming DDI Calls 3-4 times a day 
o Q00707308 - DPNSS link - OLI Field Being Ignored  
o Q00801845 - BCM 3.5 GA: Issue with busy set - stuck park prefix and set lock up  
o Q00802906 - Core telephony crashes when doing blind transfer. 
o Q00772362 - MICS 6.1 MR Load - Calls Drop when calling through CAA on M1 wit 
o Q00674189 - MICS 5.0: IC and OG calls on the PRI trunk fails, get BUSY(T60). 
o Q00540487 - Norstar fails to respond to DPNSS message 
o Q00747073 - GATM Trunks Acoustic Noise on Clear Down  
o Q00763117 - GATM: UK Pulse Dialing Thru. Stuttered Dialtone 
o Q00759960 - BCM Core reset 
o Q00763943 - Core reset doing F805 
o Q00789917 - Potential for core reset on IP trunk transfer due to stack corruption 
o Q00633770 - BCM to SL100: Network Message Services fails to deliver Redirection message 
o Q00780760 - BCM MCDN-IP Connected Number uses wrong UNIV IE 
o Q00775255 - Auto Hold for IC page- Page drops after external call is ended by caller 
o Q00762118 - Auto Hold for Incoming Page Programming Not Copied Properly 
o Q00754241 - PCM - Unable to put call on Hold (conflict with SWCA) 
o Q00739127 - Beta 1.3b DECT Module not visible under Resources>DECT 
o Q00747897 - Wrong NPI/TON for Call Forward Busy  
o Q00756256 - Dropped calls on PRI  


CORE Version Codes: 

CorePatch wi05.13  
  o 30CaF13 - EE-ETQ-3.5 (T1) 
  o 30CfF13 - EE-ETQ-3.5 (E1-Europe)  
  o 30CgF13 - EE-ETQ-3.5 (E1-Global)  
  o 30CbF13 - EE-CT2P-3.5 (T1) 
  o 30CeF13 - EE-ETQ-3.5 (E1-CALA)