PRODUCT_LINE: BCM
============================================

  Software Update Name: BCM360.286-SETFW

Applicable H/W Platforms: BCM1000, BCM200, BCM400

Applicable S/W Platforms: BCM 3.6, SRG 1.0 based on BCM 3.6

Category: GEN

Installation Recommendations: Not urgent. This patch introduces new set firmware for i2001/2/4 sets. 
Apply this patch in the next maintenance window.

Component & Version: i2001/2/4 Firmware version 0604D9H

Dependencies: Required patches - N/A

Product Dependencies - N/A

Size: 7 Mb

System Impact: 20 minutes
Does patch application force reboot: yes
Other impacts: None
Limitations: None
Patch Removable: no

Description:
-----------
The following issues are addressed:

1. New IP Set Factory F/W
IP client team is up-issuing the firmware that will be incorporated in each 
phase 2 phone coming out of the factory line. This patch provides this 
firmware so that it is available for all phase 2 phones.

This patch includes the content of the following superseded patches: 

No previous patches.
BEFORE BEGINNING

Please close any open Unified Manager or Putty sessions.

If you have a personal firewall, such as CyberArmor, ensure you either turn it off, or enter the IP address and netmask of the Business Communications Manager in the file for allowed IP addresses. In CyberArmor, this is the Friends file.

The update will not be performed until certain information has been verified about the existing status of the BCM. This will include confirming the BCM software release, the available disk space, the MSC card and MS-PECs, and information from telephony services.
This information may be confirmed in advance without modifying the existing state of the BCM.

Note: Some patches require the automated reboot of the BCM. If the patch require rebooting the BCM the patch should be applied during non-business hours or during scheduled system downtime.