PRODUCT_LINE: BCM
============================================

Software Update Name: BCM360.334-UM

Applicable H/W Platforms: BCM200, BCM400, BCM1000, SRG200 1.0, SRG400 1.0


Applicable S/W Platforms: BCM 3.6, SRG 1.0 based on BCM 3.6

Category: GEN

Installation Recommendations: This patch should be applied to all new installs 
   of BCM 3.6 and SRG 1.0 based on BCM 3.6. Existing installations should have 
   this patch applied if they are experiencing any of the issues that are 
   corrected. There is no need to schedule specific maintenance to apply this 
   upgrade if there are no reported issues. In those cases, systems should be 
   updated at the next regular service opportunity.

Component & Version: Unified Manager 3.6.0.0.2.1

Dependencies: Required patches - Cumulative Patch #3 BCM360.259-CUMULATIVE-Patch#3 
                                 or later version
                                                            BCM360.325-CTI or later version
	      Product Dependencies - None

Size: 1.4 MB

System Impact: time to apply patch ~ 20 minutes 
	       Does patch application force reboot: Yes
               Other: None

Limitations: Patch BCM360.325-CTI or later version is required for the 
             full functionality of the new prompt.

Patch Removable: No

Description:
-----------
The following issue is addressed:

1. BCM 3.6 - DTMF Tones not recognized by BCM Call Pilot when simulatenously 
   received both in-band and out-of-band 
   This patch introduces a new drop-down combo box on the page 
   Services->IP Telephony->IP Trunks->H323 Trunks->Local Gateway IP Interface, 
   with the label "Ignore in-band DTMF in RTP". The drop-down combo box has two 
   options, "Enabled" and "Disabled" (default). Using this setting, Voice CTI 
   decides to ignore or to consider the in-band DTMF digits received over a 
   VoIP call.
   Q01314181-04

This patch includes the content of the following superseded patches:

BCM_360.278_UM.39.1009
----------------------

1. The BCM can be used as a DHCP server for a CSE1000. We can change
   option 128 in the Global settings in the DHCP page of Unified Manager 
   to use port 4100 instead of 7000. This works, but when you reboot 
   the BCM, the option changes back to port 7000.	  
   Q01106118

2. This fix displays a message for the user to reboot the BCM whenever
   BCM DHCP config is changed from server to relay agent or vice versa. 
   This reboot message is needed due to the fix for the CR Q00979221, 
   which had changes in mspQoS to do some special processing when BCM 
   is relay agent.
   Q01153688

BCM 360.007 UM.39.1001
----------------------
1. Q00881489: Incremental Payloads control is missing in unified manager
2. Q00907581: BCM 3.5 does not show all the remote gateways programmed. 
             (Only 25 of them) 

BCM_360.082_UM.39.1003 
----------------------
1. Q00907581 - BCM 3.5 does not show all the remote gateways programmed. 
              (Only 25 of them)
2. Q00881489 - "Incremental Payload Size" control is missing in unified 
               manager
3. Q00944339 - LAN1 and 2 goes down after restarting the router with patch
4. Q00944340 - LED's keep on Blinking after applying patch 
              BCM_350.011_UM.39.1002-LAN Down
5. Q00956906 - ISDN Link doesn't establish after applying the patch
 	      BCM_350.011_UM.39.1002
6. Q00935053 - BCM crashes when multiple connections on same Callback user
7. Q00934446 - BT Norstar/RAS Callback not working correctly

BCM_360.184_UM.39.1006
----------------------
1. Q01103195 - G729 Payload displayed as 0ms after CP2 applied

BCM_360.239_UM3.39.001
----------------------
2. Q01220182 - BCM - 10.10.15.1 and 10.10.15.0 appear in the routing table.