PRODUCT_LINE: BCM
============================================

TITLE
=====

BCM360.354-OS2

========================
Release: 3.6 Issue: N/A
Category: GEN
Superceded By: NONE
Release Date: 20081021
Patch Conflict(s): N/A
Special Instructions: NO
Patch Version: N/A
========================

Software Update Name: BCM360.354-OS2

Applicable H/W Platforms: BCM200, BCM400, BCM1000, SRG200 1.0, SRG400 1.0

Applicable S/W Platforms:  BCM 3.6, SRG 1.0 based on BCM 3.6

Category: GEN 

Installation Recommendations: 
  This update should be applied to all the upgraded BCM 3.6 and SRG 1.0 systems
  which have undergone the Bios update. On such BCMs, there would be an issue
  with F: & G: Drive labels. There is no need to apply this update if there are no
  reported issues. 

Component & Version: Not applicable. 

Dependencies: Require Updates -  None

Product Dependencies - None

Size: 1.4 MB

System Impact: 
   Time to apply this update ~ 25 min
   Does update application force reboot: Yes 
   Other Impacts: None

Limitations: None

Update Removable: No

Description:
-----------
The following issues are addressed:

1. BCM 3.6 f: and g: drives swapped causing BIOS patch failure
    The BCM systems upgraded from 3.5 to 3.6 may have incorrect F: and G: Drive 
    labels post application of BCM 3.6 BIOS patch. On such systems the Label of 
    F: and G: will be swapped to NNINACTIVE & NNACTIVE respectively. This update 
    fixes this issue by re-swapping the F: and G: drives to have proper labels. 
    Q01624388

2. The BCM system upgraded from 3.0 to 3.5, then followed by 3.6 upgrade,
    will have incorrect F: and G: Drive labels. On such systems the label of drives are
    swapped. This update fixes this issue by re-labeling the F: and G: drives to have 
    proper labels. 
    Q01889306

This update includes the content of the following superseded updates: 
  No previous updates