PRODUCT_LINE: BCM ============================================  Software Update Name: BCM370.157-CTE Applicable H/W Platforms: BCM 200, BCM400, BCM1000 Applicable S/W Platforms: BCM 3.7 Category: GEN Installation Recommendations: This patch should be applied to all new installs of BCM 3.7. Existing installations should have this patch applied if they are experiencing any of the issues that are corrected. There is no need to schedule specific maintenance to apply this upgrade if there are no reported issues. In those cases, systems should be updated at the next regular service opportunity. Component & Version: CTE 6.7 2.50.A Dependencies: Required patches - Requires Voicemail v.37.00.90.22 or later Product Dependencies - Voicemail Size: 3.22 MB System Impact: time to apply patch ~ 20 min Does patch application force reboot: yes Other - None Limitations: None Patch Removable: No Description: -------------- The following issues are addressed. 1. LAN CTE position unable to answer When TSP receives a MADN Active message for a line, it increments the usage count for that Line. Under certain conditions, the TSP sees two MADN Active messages and the usage count is incremented to 2. This count will get decremented to 1 when the call goes to idle but never get decremented back down to 0. So when the next call comes in on that line, the count is incremented again but because the value 2 is greater than the number of appearances of that line on the set, the set is not allowed to answer the call. TSP was modified to handle such situation where two MADN active events are seen. Q01341307 2. Call transfer failure A timing issue in the BCM occurs when a Trunk hook flash is requested on a hidden call from the Secondary position while, at the same time, the Primary position releases the shared call. This issue has been corrected. Q01305364 This patch includes the content of the following superseded patches: BCM_370.079_CTE.40.240 ----------------------------- Visual Basic interface fixes Feature registration problem generating multiple session events TransferCallToVoiceMail function taking long time to return BCM_370_050_CTE_40_231 -------------------------------- The following issues are addressed: New API added to allow for clearing of VoiceMail mailboxes.