PRODUCT_LINE: BCM
============================================

Software Update Name: BCM370.237-UM3

Applicable H/W Platforms: BCM200, BCM400, BCM1000, SRG200 1.0, SRG400 1.0

Applicable S/W Platforms: BCM 3.7, SRG 1.0 based on BCM 3.7 

Category: GEN

Installation Recommendations: This patch should be applied to all
new installations of BCM 3.7 and SRG 1.0 based on BCM 3.7. Existing installations 
should have this patch applied if they are experiencing any of the issues that
are corrected. There is no need to schedule specific maintenance to
apply this upgrade if there are no reported issues. In those cases, 
systems should be updated at the next regular service opportunity.

Component & Version: Unified Manager 3.7.0.0.1.8

Dependencies: Required patches - BCM370.201-CTI or later
				 Or BCM370.213-SU3 or later
	      Product Dependencies - None

Size: ~1.4 MB

System Impact: time to apply patch ~ 20 minutes 
	       Does patch application force reboot: Yes
               Other: None

Limitations: None

Patch Removable: No

Description:
-----------
The following issue is addressed:

1. Unified Manager Issues with JRE 1.6

It is reported that certain tree nodes in Unified Manager,
such as Services->Telephony Services, are not expanding when 
used with JRE 1.6 in Windows Vista/2000/XP. This update 
resolves this issue.
Q01589273


This patch includes the content of the following superseded patches:

BCM_370.161_UM3.39.002
----------------------

1. BCM 3.6 - DTMF Tones not recognized by BCM call pilot
This patch introduces a new drop down combo box on the page,
Services->IP Telephony->IP Trunks->H323 Trunks->Local Gateway
IP Interface, with the label "Ignore in-band DTMF in RTP". 
The drop down combo box has two options viz. "Enabled" and
"Disabled". Using this setting, Voice CTI decides to ignore 
or to consider the in-band DTMF digits received over a VoIP
call.
Q01314181-01

2. BCM400 3.7 - LAN2 DHCP problem
This update resolves the problem of unable to connect to get an 
IP address from the DHCP on LAN2 after installing the cp 1 patch
(BCM_370.101_CUMULATIVE.99.1). The problem was due the UT1 driver 
being disabled by a patch to resolve Q01220182 and DHCP server 
was bound to mspQoS virtual adapter over UT1 interface. The 
solution is to disable DHCP server bindings with mspQoS virtual 
adapter over UT1.
Q01368933


BCM_370.076_UM3.39.001
----------------------

1. BCM - 10.10.15.1 and 10.10.15.0 appear in the routing table 
If you do a route print on a BCM 3.6 (or a BCM 3.7) running Australian
profile, you will see 10.10.15.0 and 10.10.15.1 as active routes 	
Q01220182