PRODUCT_LINE: BCM ============================================ TITLE ===== BCM.R400.223-OAM ======================== Release: 4.0 Issue: N/A Category: GEN Superceded By: NONE Release Date: 20080930 Patch Conflict(s): N/A Special Instructions: NO Patch Version: N/A ======================== oftware Update Name: BCM.R400.223-OAM Applicable H/W Platforms: BCM1000, BCM200, BCM400, SRG200 1.5, SRG400 1.5 Applicable S/W Platforms: BCM 4.0, SRG 1.5 based on BCM 4.0 Category: GEN Installation Recommendations: This update should be applied to all new installs of BCM 4.0 and SRG 1.5 systems based on BCM 4.0. Existing installations should have this update applied if they are experiencing any of the issues that are corrected. There is no need to schedule specific maintenance to apply this upgrade if there are no reported issues. In those cases, systems should be updated at the next regular service opportunity. The Element Manager must be downloaded and installed after applying this update. Component & Version: core-telephony-provider 41.00.32.96 mof-db 3.91 bcmEMcartridge 3.91 Dependencies: Required Updates: BCM.R400.SU.System.011 or later BCM.R400.217-CoreUploadProvider Updates should be applied in the order below: BCM.R400.SU.System.011-200804 BCM.R400.217-CoreUploadProvider Product Dependencies: None Size: 9MB System Impact: Time to apply approximately 20 minutes Does update application force reboot: Yes Other Impacts: None Limitations: None Update Removable: No Description: ----------- The following issues are addressed: 1. Element Manager times out trying to add destination codes if over 400 Routes and Destination codes are already configured. As more destination codes and routes are configured, the response times from the BCM increase quite dramatically, until the element manager finally times out before the programming was completed. Timeout occurs after there are more than 400 dest codes in the system. Q01790838 This update includes the content of the following superseded updates: BCM.R400.198-OAM ---------------- 1. Remote Scope Read Only At the Configuration -> Data Services-> DHCP Server -> Subnets -> Add button, the "Subnet Mask" field was Read Only. Q01868897 2. Help link is wrong for 'ignore in-band DTMF in RTP' At the Configuration -> Resources -> Telephony Resources -> IP Trunk Setting, when hovering over the "Ignore in-band DTMF in RTP" option, the help text was displayed with the wrong messaging. The message is corrected. Q01831506 3. EM Version inconsistency Different EM releases follow different version naming rules such that an EM version from one release is not comparable with the version number of another release, even though the frameworks are the same. To resolve the issue, a new version naming is defined and is being applied for all releases such that the EM version for different releases become comparable. Consequently, the Help screen is updated to show the EM version. Q01814447 BCM.R400.150-GAP ---------------- 1. This patch adds a privilege to the BCM called SetProgramming. The SetProgramming privilege will have access to the following Element Manager Screens: Welcome Current User Active Sets: Line Access, Capabilities and Preferences, Restrictions Active Applications DN: Line Access, Capabilities and Preferences, Restrictions Inactive DNs: Line Access, Capabilities and Preferences, Restrictions All DNs: Line Access, Capabilities and Preferences, Restrictions Q01788687-01 2. IP Set type 1110 support in Element Manager Q01764255-01 3. Issue with Element Manager installed on a French-enabled PC When starting the EM installed on a French-enabled PC (regional settings set to French Canada or any other French language region), some incorrect text is displayed ("Panneau de navigation d???l??ment"). This update ensures that French text will be properly presented in the EM. Q01535611 4. Button mapping is incorrect for M7310 graphical representation When programming buttons on an M7310 set with the Element Manager, the buttons were incorrectly numbered. The button #11 was missing and there was a non-functional button numbered 35. This update adds button #11 and deletes button #35. Q01725188 BCM.R400.061-OAM ---------------- 1. Line Tuning For BCM 4.0 This update introduces the line tuning feature for the BCM 4.0 product. Q01475421 2. Feature Enhancement for BRI EURO Protocol to work in both S-T and T-T user mode. Q01296708-05 3. After upgrade to BCM4.0 WAN PPP link does not come up. The problem is due to no option provided to configure NONE Authentication. This patch corrects the problem adding the NONE option to Element Manger. Q01500035 & Q01531731 BCM.R400.036-ElementManager -------------------------------- 1. Element Manager Freeze After a restore operation, Element Manager can freeze with a small dialog box visible that cannot be closed. To close the Element Manager application, the End Task button must be used from the Windows Task Manager. Q01396834-01 2. After a restore operation, the user is unable to select the configuration tab. After a restore operation, if the user selects the Configuration tab, the screen navigation tree does not update to allow the user to select configuration screens. Element Manager must be shut down and restarted to resume normal operation. Q01396834-01 3. Ignore in-band DTMF in RTP On the "IP Trunk Settings" tab in the Element Manager there will appear a new option "Ignore in-band DTMF in RTP". When enabled, this will cause the Voice CTI applications (including Voice Mail applications, IVR and Call Center) to ignore any in-band tones received over a VoIP trunk call that are encoded in the RTP. This setting should be enabled when the far end is a Call Server 2000 (CS2K) and Packet Voice Gateway (PVG) combination, where the PVG is provisioned for OOBDTMFSupp=FullSupport, resulting in the PVG + CS2K sending out of band, as well as in-band, DTMF tones at the same time to the BCM. The PVG MAY not send both tone notifications depending on whether the call is using G711 and depending on what the SN0 version is. Q01376707-01