Nortel BCM 3.6/3.7 to BCM 4.0 Pre-Check Upgrade ToolPre-Check version 1.0.1Pre-Check started 2006/11/27 03:38pOK:   Default login credentials were used; admin user and password OKOK:   File ksuversion.typ (to determine core load) is presentOK:   Inventory service runningOK:   System Status Monitor registry key presentOK:   ComputerName is: TAUNTONBCMMotherboard version: CA810eProduct version:     BCM1000BIOS version:        CA81020A.86A.0008.P04Motherboard does not require BIOS updateChecking hard drive partitioning...OK:   Drive C: found, is labelled WINNT and is filetype NTFSOK:   Drive D: found, is labelled DATA and is filetype NTFSOK:   Drive E: found, is labelled LOGS and is filetype NTFSOK:   Drive F: found, is labelled NNACTIVE/NNINACTIVE and is filetype NTFSOK:   Drive G: found, is labelled NNACTIVE/NNINACTIVE and is filetype NTFSOK:   Drive with label MAINTOS is I:, type NTFSOK:   H: drive is not label MAINTOS, but is on partition OK:   Expected volume name DATA presentOK:   Expected volume name LOGS presentOK:   Expected volume name NNACTIVE presentOK:   Expected volume name NNINACTIVE presentOK:   Expected volume name WINNT presentOK:   Expected volume name MAINTOS presentOK:   Volume LOGS is on extended partitionOK:   Volume NNACTIVE is on extended partitionOK:   Volume NNINACTIVE is on extended partitionOK:   Volume WINNT is not on extended partitionOK:   Volume MAINTOS is not on extended partitionOK:   Parsed drive C: from DriveQuery outputOK:   Parsed drive D: from DriveQuery outputOK:   Parsed drive E: from DriveQuery outputOK:   Parsed drive F: from DriveQuery outputOK:   Parsed drive G: from DriveQuery outputOK:   Parsed MAINTOS drive I: from DriveQuery outputOK:   I: partition appears before D: partitionOK:   MAINTOS I: partition appears before D: partitionOK:   C: partition appears before D: partitionOK:   D: partition appears before E: partitionOK:   D: partition appears before F: partitionOK:   D: partition appears before G: partitionOK:   E: partition is of correct sizeOK:   F: partition is of correct sizeOK:   G: partition is of correct sizeChecking for existance of services...OK:   Service voicemscdriver presentOK:   Service voicemscservice presentOK:   Service VoiceCTI presentOK:   Service cfsServer presentOK:   Service VoiceMail presentOK:   Service EmsManager presentOK:   Service Router presentOK:   Service MGS presentOK:   Service MPS presentOK:   Service UTPS presentOK:   Service winvnc presentOK:   Service VoiceRecord presentOK:   Service voicewatchdog presentOK:   Service VoiceNetQosMonitor presentOK:   BCM Version check. BCM version 3.6 build 2.2c IS supported for this upgradeOK:   Computername: "TAUNTONBCM"OK:   Disk size check. Disk is 19 GBOK:   BCM drive C: check. Drive C: has sufficient spaceOK:   BCM drive D: check. Drive D: has sufficient spaceOK:   BCM drive E: check. Drive E: has sufficient spaceOK:   Extended partition check. Extended partition must start at at least offset 106928640 and is currently set to start at offset 3693150720OK:   Voice Mail and IVR checkOK:   IP Music checkOK:   Call Detail Recording checkFAIL: HardDrive model check. HardDrive model is unknownOK:   System inventory file was successfully re-generatedOK:   MSC Card check. MSC card is type MSC1AOK:   MSC check. KSU version (MSC Core) is [30DdG28] which IS supportedOK:   Four PECs detectedOK:   RAM check. BCM has 260276 megabytes of RAMOK:   European market profile not selectedOK:   Date check. The system date is configured correctlyPre-Check has detected a failure so this BCM is NOT OK for upgrade