Nortel BCM 3.6/3.7 to BCM 4.0 Pre-Check Upgrade Tool



Pre-Check version 1.0.1

Pre-Check started 2006/12/06 02:31p



OK:   Default login credentials were used; admin user and password OK

OK:   File ksuversion.typ (to determine core load) is present

OK:   Inventory service running

OK:   System Status Monitor registry key present

OK:   ComputerName is: PASSPORTBCM



Motherboard version: SH815

Product version:     BCM200

BIOS version:        02.03.50



Checking hard drive partitioning...

OK:   Drive C: found, is labelled WINNT and is filetype NTFS

OK:   Drive D: found, is labelled DATA and is filetype NTFS

OK:   Drive E: found, is labelled LOGS and is filetype NTFS

OK:   Drive F: found, is labelled NNACTIVE/NNINACTIVE and is filetype NTFS

OK:   Drive G: found, is labelled NNACTIVE/NNINACTIVE and is filetype NTFS

OK:   Drive with label MAINTOS is I:, type NTFS

FAIL: H: drive is label MAINTOS, and is not on partition 

OK:   Expected volume name DATA present

OK:   Expected volume name LOGS present

OK:   Expected volume name NNACTIVE present

OK:   Expected volume name NNINACTIVE present

OK:   Expected volume name WINNT present

OK:   Expected volume name MAINTOS present

OK:   Volume LOGS is on extended partition

OK:   Volume NNACTIVE is on extended partition

OK:   Volume NNINACTIVE is on extended partition

OK:   Volume WINNT is not on extended partition

OK:   Volume MAINTOS is not on extended partition

OK:   Primary partition is drive C:

OK:   Parsed drive C: from DriveQuery output

OK:   Parsed drive D: from DriveQuery output

OK:   Parsed drive E: from DriveQuery output

OK:   Parsed drive F: from DriveQuery output

OK:   Parsed drive G: from DriveQuery output

OK:   Parsed MAINTOS drive I: from DriveQuery output

FAIL: Expected H: partition to appear before C: partition

OK:   MAINTOS I: partition appears before D: partition

OK:   C: partition appears before D: partition

OK:   D: partition appears before E: partition

OK:   D: partition appears before F: partition

OK:   D: partition appears before G: partition

OK:   E: partition is of correct size

OK:   F: partition is of correct size

OK:   G: partition is of correct size



Checking for existance of services...

OK:   Service voicemscdriver present

OK:   Service voicemscservice present

OK:   Service VoiceCTI present

OK:   Service cfsServer present

OK:   Service VoiceMail present

OK:   Service EmsManager present

OK:   Service Router present

OK:   Service MGS present

OK:   Service MPS present

OK:   Service UTPS present

OK:   Service winvnc present

OK:   Service VoiceRecord present

OK:   Service voicewatchdog present

OK:   Service VoiceNetQosMonitor present



OK:   BCM Version check. BCM version 3.7 build 2.4f IS supported for this upgrade

OK:   Computername: "PASSPORTBCM"

OK:   Disk size check. Disk is 19 GB

OK:   BCM drive C: check. Drive C: has sufficient space

OK:   BCM drive D: check. Drive D: has sufficient space

OK:   BCM drive E: check. Drive E: has sufficient space

OK:   Extended partition check. Extended partition must start at at least offset 106928640 and is currently set to start at offset 3693150720

OK:   Voice Mail and IVR check

OK:   IP Music check

OK:   Call Detail Recording check

OK:   HardDrive model check. HardDrive model is Maxtor 2F020~

OK:   System inventory file was successfully re-generated

OK:   MSC Card check. MSC card is type MSC1A

OK:   MSC check. KSU version (MSC Core) is [30DjH14] which IS supported

OK:   Check PECs. One PEC detected

OK:   RAM check. BCM has 260020 megabytes of RAM

OK:   European market profile not selected

OK:   Date check. The system date is configured correctly





Pre-Check has detected a failure so this BCM is NOT OK for upgrade