PRODUCT_LINE: BCM50
============================================

TITLE
=====

BCM050.R300.UBOOT-214

========================
Release: 3.0 Issue: N/A
Category: GEN
Superceded By: NONE
Release Date: 20100216
Patch Conflict(s): N/A
Special Instructions: NO
Patch Version: N/A
========================

Software Update Name: BCM050.R300.UBOOT-214

Applicable H/W Platforms: BCM50, BCM50a, BCM50e, BCM50b, BCM50ba, BCM50be, SRG50

Applicable S/W Platforms: 6.0.2.05, SRG50 R3

Category: GEN

Installation Recommendations:
This update should be applied to all new installs of BCM50 R3 and SRG50 3.0.  
Existing installations should have this update applied if they are experiencing any 
of the issues that are corrected. There is no need to schedule specific maintenance 
to apply this upgrade if there are no reported issues. In those cases, systems 
should be updated at the next regular service opportunity.

Caution: Power should not be disconnected from the system OR system should
not be rebooted when update is being applied. Doing so will put the system in
an unrecoverable state. 

Components and Versions:
 
   bsp-u-boot 1.2.24.1.3

Dependencies:
Required Updates: None
  
Product Dependencies: None

Size: 0.39MB

System Impact:
   Time to apply approximately 10 minutes

   Does update application force reboot: Yes

   Other Impacts: None

Limitations: None

Update Removable: No

Description:
-----------
The following issue is addressed:

1. BCM may not start after reboot due to some anomaly in u-boot
   Systems with Seagate hard drives, intermittently fails to boot. 
   This was due to some issue with the default setting of SATA controller. 
   This update resolves the issue.
   Q02052788-01

2. Corruption of enigma logs
   The enigma log may become corrupted if power is pulled while it is being
   written. As the result system fails to boot. This update resolves the issue. 
   Q01864365-01      

This update includes the content of the following superseded updates:

No previous updates