ATTENTION:

Since current BIOS update process wipes out the hard drive, 
if you choose to update BIOS, please do it before you install
CallPilot system from image.


BIOS UPDATE INSTRUCTION:

The BIOS updating process contents 3 phases:

1. Boot system into ROM-DOS, choose "SCSI CD_ROM" and Run 'Phase1.bat'

	In Phase 1, your system will be re-partitioned. So, all data
	on all partitions will be lost, please ensure you have backed
	up your data and ready for BIOS update. 
	System will reboot at the end.

2. Boot system into ROM-DOS, choose "SCSI CD_ROM" and Run 'Phase2.bat'

	In Phase 2, the hard drive on your system will be formated,
	BIOS update utility, as well as an autoexec.bat & a config.sys
	will be copied to the hard drive.
	System will reboot at the end.

3. Boot system into Hard drive (C:), choose "Update BIOS..."

	In Phase 3, the BIOS update utility will be fired automatically.

After BIOS updating, you can start installing CallPilot system from image.
(Boot system into ROM-DOS, choose "SCSI CD_ROM" and Run 'Image.bat')


9:28 AM 6/10/2004