CallPilot 4.0 Upgrade Wizard v. 04.04.04.07
===========================================

Distribution name: CP404_UpgradeWizard_v07


Files included in the distribution:
-----------------------------------
- UpgradeWizardInstaller.exe - Upgrade Wizard installation program.
- Files folder - Files to be installed by the installation program.
- UpgradeWizard_readme.txt


Description:
------------
This tool has been designed to identify potential upgrade impacting problems 
while the CallPilot server is still in service, before the system upgrade begins. 
The areas that are targeted for validation are: the database, CallPilot software 
and hardware configuration.

Note: The CallPilot software and hardware configuration testing may be performed anytime,
but is recommended that the database validation and backup be executed during system 
quite time.

Please make sure to read the Upgrade and Platform Migration guide (555-7101-207) 
before running the Upgrade Wizard for detailed instructions of the wizards operation.

CallPilot systems qualified to run this wizard:
- CallPilot Release 2.02 SU03 or greater
- CallPilot Release 2.5 SU01 or greater
- CallPilot Release 3.0 GA or greater
- CallPilot Release 4.0 GA or greater


List of CRs that are fixed by this update:
------------------------------------------
Q01321895 Missing information on Upgrade Wizard for CP4.0 to support 1005r


Other fixes resolved in the previous versions of Upgrade Wizard:
----------------------------------------------------------------
Q01184243 Incorrect Drive configuration on the Image CD for GA load
Q01263772 Unable to set Directory Sync password after upgrade
Q01334909 Unable to add mailboxes after upgrade
Q01347349 Setup Wizard Restore fails to restore LDAP SUFFIX regkey
Q01393878 Wrong CallPilot version 04.04.04.03-00 causing restore to stop
Q01252658 Upgrade Wizard fails after filling up the D drive with 301MB free space
Q01286922 New System BIOS version 10 for 1005r platforms 
Q01290881 User Archive restore terminates - error 41814 unanticipated exception error. 
Q01267783 Introduction of new platform 1005r 
Q01161747 Not possible to re-add previously used mailbox
Q01198237 Upgrade Wizard utility can not continue after selecting backup medium 
Q01167692 Registry check fails after the RAID subsystem was updated. 
Q01167595 On Select Media Screen, the correct option should be "Backup to Remote Disk 
Q01167563 In the Upgrade Wizard, there is no "Back" Button on the Select Media Screen. 
Q01167583 In the Upgrade Wizard, there is no "Back" Button on the Platform Validity Screen 
Q01181060 CallPilot Upgrade Wizard fails to run on 1001RP platform 
Q01170113 Upgrade Wizard guardrail for verifying successful backup
Q01167210 Upgrade wizard gives wrong number of image cds
Q01170028 Upgrade/SetUp Wizards PEP/SU check sometimes incorrectly fails


Problem Descriptions:
---------------------
Q01321895:
When running the CP4.0 UpgradeWizard on an unsupported platform it does not show 
1005r as a possible migration platform.


Usage:
======
The tool must be run on a CallPilot Server before starting the upgrade to CallPilot 4.0. 
This version of the upgrade wizard and upgrade guide are in general release and apply 
to sites upgrading to the CallPilot 4.0 GA release (build 04.04.04.00).

To install the CallPilot Upgrade Wizard:
1) Read the CallPilot 4.0 Upgrade and Platform Migration Guide (555-7101-207).
2) Run the self extracting CP404_UpgradeWizard_v07.exe. Files are extracted to    
   the D:\temp\UpgradeWizard directory.
3) Install the wizard by running D:\temp\CP404_UpgradeWizard_v07\UpgradeWizardInstaller.exe.
4) Run the Upgrade Wizard from Start->Programs->CallPilot->Upgrade Wizard

To uninstall the CallPilot Upgrade Wizard:
1) Ensure that the Upgrade Wizard is not running.
2) Launch the 'Add/Remove Programs' tool from the control panel 
   (Start -> Settings -> Control Panel -> Add or Remove Programs).
3) Select "CallPilot Upgrade Wizard" and click Remove.