This information is for the TANDBERG.SYS software driver,
version 1.5 for Windows NT 4.0.


Contents:

 * Information about the TANDBERG.SYS driver
 * Installation of the TANDBERG.SYS driver
 * How to get the version information from the driver
 * Further information and support


Information about the TANDBERG.SYS driver
=========================================

TANDBERG.SYS is a Windows NT 4.0 software driver, supporting
the standard SCSI-2 versions of the Tandberg Data tape drives:
SLR2 (TDC 3800), SLR3 (TDC 4100), SLR4 (TDC 4200), SLR4-DC (TDC 4222), SLR5,
SLR7, SLR24 (SLR6), SLR32 (MLR1), SLR40, SLR50 (MLR3), SLR60 and SLR100.

The TANDBERG.SYS replaces the driver named TANDQIC.SYS applicable 
to most of these drives.


Installation of the TANDBERG.SYS driver
=======================================
The installation of the driver is done from an installation
diskette containing the 4 files (assuming the files are copied
to the root directory of a diskette):

  - disk1
  - oemsetup.inf
  - TANDBERG.SYS
  - readme.txt      (this file)


Installation procedure:

 1. Open the Control Panel.
 2. Double click on the "Tape Devices" icon.
    (Ignore any devices that may not have a driver installed 
     at this time.)
 3. Select the "Drivers" tab.
 4. Remove all drivers that are installed
    (even if they are not started).
 5. When done, Select Add new driver.
 6. Select the "Have Disk".
 7. Select "A:\".
 8. Select the "Tandberg Data SLR2..100 driver".
 9. Select "A:\".
10. Remove the diskette and select "Yes" to restart the computer.


How to get the version information from the driver
==================================================
When installed, the TANDBERG.SYS driver is placed in the
C:\WINNT\system32\drivers directory.

1. Using Windows NT Explorer, Right-click on the TANDBERG.SYS 
   and select Properties.
2. Click on the "Version" tab.


Further information and support
===============================
Visit Tandberg Data on the World Wide Web: "http://www.tandberg.com/".