Properties are read at startup. When you change properties, you must shut down and restart the MobiLink synchronization server for them to take effect.
The Ports tab of the UDP Gateway property sheet has the following components:
Destination Port You can specify the port on the remote device where the gateway sends the UDP packet.
Use the default port (5001) Choose this option to use the default listening port of the supplied UDP Listener (5001).
Use this port Specify the port on the remote device where the gateway sends the UDP packet.
For more information, see .
Origin Port You specify the port to use for sending the UDP packet. You may need to set it if your firewall restricts outgoing traffic.
Use a system-assigned port Select this option if you want your operating system to assign a free port.
Use this port Select this option to specify the port used for sending the UDP packet.
For more information, see .
Network Address You can optionally specify the IP address of the sender.
Use the default network address Select this option to use the default network address, localhost.
Use this address Select this option to specify the IP address of the sender. You should specify an address if you have multi-homed hosts.
For more information, see .